Holley 558-308 - Main Power Harness for Avenger EFI, HP EFI and Dominator EFI

Holley 558-308 - Main Power Harness for Avenger EFI, HP EFI, & Dominator EFI

This Harness is required with HP or Dominator ECUs. Includes, 13' long, 10 AWG main power harness, Qty. (2) 3/8" ring terminals and shrink tube (not pictured) . The harness is fuse protected and covered in braided split loom for additional abrasion protection .

Note: 
The Main Power Harness MUST be connected directly to the Battery terminals.   Do not connect them to any other location such as a disconnect switch, starter solenoid or distribution lug. The harness length is 13 feet. If you need to extend the length do so with 8 AWG or larger multi-strand wire.